THE PERFECT SOLUTION for your Machinery requirements

Light Weight, Ideal for Concrete/Asphalt Floor, fine and adjustable cutting with efficiency, powerful function, durable rust-prove plastic water tank and Semi-auto moving with easy cutting

Cutting a concrete floor is not hard to accomplish if you have the right tools on hand.

Mark the floor with a chalk line or a piece of sidewalk chalk to indicate where the cuts are needed.

Open windows to ensure adequate ventilation. Close the water flow valve on the cutter and turn the water on.

Start the engine on the concrete cutter. Turn the water on so there is a steady flow that will keep the dust away and keep the blade cool.

Ease the cutter blade into the surface of the concrete. Do not plunge the blade into the concrete too quickly as this could harm the blade, the machine and you. Follow the marks on the concrete and complete the cut.

Shut the cutter engine off after shutting the water valve off. Allow the engine to cool, then hose the machine off and clean it well.

Perfect Machinery provides High Quality wet Cutting Blades for Concrete and Asphalt.

Many blades are designed to operate either wet or dry. However, diamond tools and blades work better when wet. Water will prevent the blade from overheating, greatly reduce the amount of harmful dust created by cutting, remove the slurry from the cut, and extend the life of the blade, since diamond is unable to withstand the forces involved at the elevated temperatures involved in dry cutting ceramic and abrasive materials, and will be subject to rapid tool wear and possible failure.